Canal Paver
Salient Features
- High precision cylinder finish pavement for concrete slabs such as canal & reservoir.
- Finishing width from 3.6 m to 18m. Machine can finish up to 200 m2 I hour. (According to site condition)
- Designed in a way for easy erection and transport.
- The special undercarriage consists of spreader auger to spread the concrete to level.
- The vibratory cylinder to compact and finish the concrete to the grade.
- Vibratory cylinder bracket for compaction and finishing.
- Machine can be used alternatively for bed and slope concrete lining.
- Special arrangement is made for PVC inserter, which can insert PVC longitudinally as well as vertically. Also groove cutter arrangement can be made as per requirement.
PVC Inserter
Sub Heading
Needle Vibrator (optional)
Sub Heading
Groove Cutter
Sub Heading
Extra Long Auger
Sub Heading
Gang Vibrator
Sub Heading
Under Carriage
Sub Heading
Technical Specifications
- FRAME CONSTRUCTION
- LENGTH VARIABILITY
- PRIME MOVER
- FINISHING ASSEMBLY
- CURVATURE FOR ANY SLOPE RATIO
- OPTIONAL ACCESSORIES
Frames are made from welded steel panels in standard length of 2′, 4′ and 8′. These are bolted together according to the size of the slab width.
- Frames are pin bolted with each other for quick erection. The total length varies from 3.5 m to 18 m.
- Greater length can be supplied as per requirement.
- Overhead truss assembly is required only when frame length is more than 18m.
- Driver End Panel- 5 HP Geared Motor .
- Vibratory Cylinder- 5 HP Geared Motor.
- Bogie RH & LH -1 HP + 1 HP Geared Motor
- Vibratory Cylinder -1 HP Electric Vibratory
- The undercarriage travels with a speed of 152 fpm.
- Vibratory finish cylinder bracket.
- Cylinder : 10-inch diameter & 4ft. long.
- Auger: 10-inch diameter (Extra-long with hard face welding to obtain maximum life).
Slope ratio from 1:1, 1:1.5 and 2:1 as per customer’s design.
- Trimming attachment
- PVC strip inserter
- Groove cutter
- Taing arrangement
- High Frequency Needle Vibrator
